6 Ways to Quickly Boost Your Outdoor TV Antenna Signal

If you live on the edge of the city or hundreds of kilometers from the closest town in the outback and use a TV antenna, you’ve probably encountered static at least once. 

It’s possible you’ve been dealing with it for a long time. Let’s just hope it doesn’t happen during a big championship game or your favorite TV Show. But you need not suffer the loss of signal anymore. There are a few things you can do to improve your antenna signal and eliminate pixelation for good.

Follow these six antenna signal-boosting tips, and you’ll never be concerned again.

How to Boost Outdoor TV Antenna Signal

1. Reset Your Digital Tuner 

This quick-fix might be all you need to improve your TV signal.

Your incoming signal is converted into a digital format that your TV recognises through a digital tuner. However, broadcasters adjust their metadata periodically, which may interfere with your tuner’s ability to decipher the signal. Since your digital tuner is using older data, it may not be receiving the correct channel information.

The simplest method for resetting a tuner is to follow these simple steps:

Step 1: Remove the coaxial cable from your television.

Step 2: Run a channel search on your television.

Step 3: Unplug and switch off your television and converter box.

Step 3: Re-establish all relations.

Step 4: Repeat the channel scan.

Following these steps may solve your problem.

2. Make use of a Signal booster

Installing a television signal booster on your television is one of the first things you can do to improve your outdoor TV antenna signal. 

This is an improvement from the old days when you had to screw these into a port on your television. The newer models will connect to one of the USB ports found on most modern televisions. This will give you the maximum range that your Antenna is capable of.

The problem with a poor signal is that it doesn’t fully reach the Antenna, so things like audio and video won’t be as clear as they should be.

3. Raise the Antenna

If a reset does not help you boost your connection, then there may be some fault in your antenna, and it could mean you need to replace it. We highly recommend the Gesobyte Amplified HD Digital TV Antenna. You’ll get more channels for less TV bills.

The primary reason why most people lose signal is that their Antenna doesn’t have a precise range to the towers.

You must ensure that the antenna signal is not bouncing off an obstacle in its paths like a tree or a building. Obstacles in the way of the antenna connection fragment the signal resulted in a pixelated TV display and disrupting your TV time. You may need to raise your antenna for more signals.

Experts recommend installing an antenna at least 10 to 20 feet from the ground. The best option is the highest point in your home or apartment building, the roof.

4. Ensure that your Antenna is aimed Correctly

Unidirectional and multidirectional antennas (and even some omnidirectional antennas) provide strong reception, but they must be precisely aimed at the radio frequency signal source.

Consumer-grade unidirectional antennas, such as the ones shown below, are typically Yagi or log-periodic in nature.

Re-aim your Antenna towards transmission towers if your reception is low.

5. Your Antenna’s Position or Location Can Be Changed

Slight changes in your Antenna’s location, like re-aiming, can make a difference. Try moving it just a little bit to a new place.

If this doesn’t work, transfer it to a different part of your house.

Because of the mechanics of signal propagation and the fact that minor distortions caused by objects in the Antenna’s line of sight (e.g., trees, tall buildings, hills, etc.) might be obstructing reception in the Antenna’s current location, moving your Antenna might be a viable option.

6. If it still does not work, you need to contact a professional

Are you still having problems after following this guide on how to improve antenna signals?

When all else fails, it’s time to call someone who knows what they’re doing.

This guide may have helped you get a better answer, but there are some things that are better left to the professionals. Maybe lugging a load of heavy machinery onto your roof isn’t your cup of tea. In any case, there’s no harm in contacting someone to help you with your problem.