Aftershokz open ear bone conduction wired headset model Sportz M2

Three Methods to Connect Aftershokz

To connect your AfterShokz to any device, simply follow the instructions provided in this guide. Switching devices or connecting with new ones is a breeze with AfterShokz, allowing you to continue enjoying an enhanced listening experience.

Please note that if your device utilizes Bluetooth Version 3.1 or lower, it will not be compatible for connection. AfterShokz headphones and headsets can only be successfully paired with Bluetooth devices that have version 3.1 or higher. Additionally, you can utilize a device with Bluetooth version 3.1 and above to connect your AfterShokz headphones to a Smart TV.

In the event that your TV lacks Bluetooth functionality, you will require a Bluetooth transmitter to establish a connection with AfterShokz.

How to Connect AfterShokz with iPhone

Aftershokz

Knowing how to pair your AfterShokz with your device is highly beneficial, whether you have recently acquired the headphones, obtained a new phone, or experienced a loss of connectivity.

To initiate the connection process with your AfterShokz, start by turning off the headphones. Next, press and hold the volume+ button for 5-7 seconds to activate pairing mode. Once your device announces “Welcome to AfterShokz,” you can be certain that the connection has been successfully established. Continue by holding down the power button until the LED light turns red and blue.

Navigate to the Bluetooth Settings within your device’s Settings menu and select your AfterShokz headphones. Upon successful pairing, your device will indicate “Connected.” At this point, your iPhone and headphones should be successfully connected.

How to pair AfterShokz with Android

Before proceeding, ensure that you have removed your headphones. Next, press and hold the volume+ button until Audrey, the voice prompt, announces “pairing” and the LED indicator starts flashing red and blue. This indicates that you have successfully entered pairing mode.

Access the Bluetooth menu on your device and select your AfterShokz headphones from the list. Once the connection is established, your device will display “Connected” and the LED indicator on the headphones will flash blue momentarily.

How to pair AfterShokz to multiple devices

To establish a connection between AfterShokz headphones and multiple devices, the Multipoint pairing feature needs to be enabled. Fortunately, AfterShokz headphones support Multipoint pairing, which allows users to simultaneously connect to two or more devices. Please note that audio from multiple devices will not play simultaneously, but switching between them will be effortless.

Follow these steps to utilize Multipoint pairing and connect multiple devices:

  • Start by turning off your headphones.
  • Press and hold the volume+ button for 5-7 seconds, or until the LED light flashes red and blue, to enter pairing mode.
  • Press and hold the multifunction button and volume+ button together for 2-3 seconds. You will hear Audrey say, “Multipoint Enabled.”
  • Connect the first device, and you will hear Audrey say, “Connected.”
  • Turn off your headphones.
  • Press and hold the volume+ button for 5-7 seconds, or until the LED light flashes red and blue, to re-enter pairing mode.
  • Connect the second device to the first one, and you will hear Audrey say, “Device Two Connected.”
  • Remove your headphones.
  • Your headphones should now be successfully paired with these devices.

Why won’t my AfterShokz pair?

To enter pairing mode, press and hold the Volume+ button for 5-7 seconds. Once your headphones are powered on, the LED light will start flashing red and blue. At this point, you can remove your headphones. They have been reset and are now ready to be paired with your device again.

How do you pair AfterShokz?

To enter pairing mode, press and hold the Volume+ button until Audrey, the voice prompt, says “pairing,” and the LED indicator on your headphones flashes red and blue. Once in pairing mode, open the Bluetooth menu on your device and select your headphones from the list. Audrey will announce “connected,” and the LED indicator on the headphones will briefly flash blue.

How do I reset my AfterShokz?

To reset your headphones, simultaneously press and hold the Multifunction button, Volume+, and Volume- buttons for 3-5 seconds. You may hear beeps or feel vibrations as an indication. Once the reset is complete, you can remove your headphones. They have now been successfully reset and are ready to be paired with your device again.

Can I connect my AfterShokz to my computer?

Due to the open-ear design of AfterShokz, numerous customers find them suitable for wearing during work activities. You have the option to connect the headphones to your laptop, allowing you to enjoy music or engage in Skype calls while staying connected with your colleagues

What is the purpose of the Multifunction button?

Every pair of AfterShokz wireless Bluetooth headphones includes a multifunction button, conveniently positioned on the left transducer of the headphones. While wearing your AfterShokz, you can easily locate the button by running your finger along the surface of the transducer.

Can AfterShokz connect to TV?

By connecting AfterShokz to your TV, you can enjoy watching your favorite shows while maintaining awareness of your surroundings. This feature can also be beneficial for individuals with hearing impairment, as it allows them to experience audio content. If you wish to watch the latest episode with a friend or family member, consider seeking a dual transmitter that enables the pairing of two sets of headphones simultaneously. This way, both of you can enjoy the content together.

How do I connect my AfterShokz to my new phone?

To enter pairing mode, press and hold the Volume+ button for 5-7 seconds. Audrey will greet you with “Welcome to AfterShokz.” Keep holding the Volume+ button until the LED light flashes red and blue.

Next, go to the Bluetooth settings on your device and choose “Aeropex” from the available options. Audrey will confirm the connection by saying, “Connected.” At this point, you should have successfully connected your headphones to your device.

Why are my AfterShokz blinking red and blue?

However, if your headphones are flashing red and blue, it signifies that they are no longer paired with your device. This indicates that your headphones are actively searching for another Bluetooth device to establish a connection with. During this pairing mode, the headphones may make attempts to connect with another device but ultimately fail to establish the connection.

Where is the power button on AfterShokz?

The power button also doubles as the volume+ button, distinct from the multifunction button located on the transducer’s side. When the headphones are powered on, Audrey will audibly announce “Welcome to Titanium” as an indication. To power off the headphones, simply press and hold the same button.


Posted

in

by

Tags: