7 Ways To Fix Firestick Not Turning On Signal

The Fire Stick has a significant advantage over other streaming devices in terms of entertainment. Another benefit is that the Fire Stick remote includes both voice search and manual control. However, as with any other device, it has drawbacks, and users encounter problems.

I understand how inconvenient it is to search for a TV show to watch, only to discover that your Fire Stick has no signal.

Reasons for the Fire Stick No Signal issue

Several factors can cause a no signal issue on your Fire Stick.

The following are the most common causes of No Signal on your Fire Stick:

1. A faulty HDMI port or a loose HDMI cable.

2. USB stick inserted into the TV’s power cord.

3. Incorrectly connected or weak signal strength.

4. Some router settings are incompatible with the technology. Make sure your router’s settings are compatible with your device.

Now, how do you get rid of the Fire Stick No Signal issue?

Here’s a complete troubleshooting guide for you to follow:

How to Fix the Fire Stick No Signal Problem

The solution to your Fire Stick’s signal problem may differ depending on the circumstances. However, these are the best solutions:

1. Check Amazon Servers

This is the very first thing you should do. The Amazon Fire Stick is powered by Fire OS, built with Android, and the operation is hosted on Amazon Web Services (AWS) servers. Although they are known as the gold standard regarding uptime and overall reliability, AWS may experience some issues.

To check the Amazon network server, go to Downdetector or this link. It’s a genuine Amazon issue if you notice a significant increase in outrage, and you have no choice but to wait for Amazon to resolve the issue.

2. Check the network connection

The No Signal issue on your Fire Stick is mainly caused by your router’s network or internet connectivity.

Check that all connections and cables are correctly connected to your router and that the router’s lights indicate an active internet connection.

3. Restart your router

You can perform a simple power cycle on your router by turning it off for 3-5 minutes.

Connect your Fire Stick after the router has restarted to see if you are still experiencing the No Signal issue.

4. Change Your Wi-Fi connection

A WiFi connection is one of the frequencies that can assist you in receiving a stronger signal in your home or office.

Changing the frequency of your WiFi can improve the overall wireless strength of your network and provide better connectivity to the Fire Stick.

5. Fix HDMI/Port

You should be aware that both the HDMI ports and the cables are required for the Amazon FireStick to function correctly.

To check for HDMI errors, follow the steps below:

• The first step is to ensure that your HDMI cable is finger-tight with the HDMI port.

• Check the cable for any scrapes or cuts as well.

• Try connecting it to another port.

You can also test the port to see if it now works perfectly.

6. Reboot Amazon Fire Stick

You can’t perform a software reboot on Amazon Fire Stick due to a No Signal error. Instead, you’ll have to unplug all of the devices connected to the TV and try again.

Turn off the TV and unplug the HDMI stick from the HDMI port. Wait 5 minutes after disconnecting the Amazon Fire TV Stick from the power source.

Turn on the television and reconnect the Fire TV Stick. Before proceeding, press a random button on the Fire Stick remote for a few seconds.

7. Reset Your Fire Stick

This reset works because it cools your network settings and then reconnects to a different frequency and also flushes temporary network connection settings after restarting.

Follow these steps below to reset your Fire Stick:

• Turn on your TV and Fire Stick.

• For about 10 seconds, press and hold the Back button and the right side of the maritime circle simultaneously.

• Select Continue Resetting.

• It will take a few minutes to reset the device.

You can also reset by going to Settings. To accomplish this, you must:

• Use your remote to navigate the Home screen by pressing the Home button.

• Next, go to Settings. To move around, use the navigational circle on your remote.

• After scrolling through the options, select My Fire TV; this will be indicated as a Device or System if you have an older version of the Fire Stick.

• Click the Reset to Factory Default button. If prompted, enter your pin.

• Select Reset; this will take some time. When it’s finished, it will notify you.

Read also How to Factory Reset Firestick Without PIN


How do you reboot Fire Stick?

Unplug the power cord for 3 seconds before plugging it back in. From the menu, you can also restart the Fire Stick.

Select Settings from the Home menu, then navigate to My Fire TV. Click the Restart button; the Fire Stick will restart.

Why is my TV not recognizing my Fire Stick?

This problem may occur if your power source is not connected correctly, the HDMI cables are damaged, or the screen resolution is insufficient.

Why is my Amazon Fire Stick showing no signal?

If your TV is incompatible with HDCP or your HDMI cables are faulty, the Fire Stick will not receive a signal.

Why does my TV say no signal when HDMI is plugged in?

A TV’s “no signal error” is caused by using the incorrect HDMI cable, a faulty graphics driver, or a damaged HDMI port.

Check out the Best Movie Apps For Firestick.