Modern TVs are far more superior in terms of designs; however, they remain fragile. Additionally, they’re heavy items with pointy parts, so the last thing you’d want is for your TV to fall on you or your kid.
The fact is that even with a fancy TV stand, your TV is not entirely secure, and this is where propping up TV without a stand comes to the rescue. Propping up a TV without a stand not only secures your TV but it’ll save tons of space as well.
Let’s look into some ways to prop the TV up on the wall on your own.
Prop Up a TV Without a Stand
Step 1: Determine the suitable height
It typically takes 2-3 people to position a TV depending on the size. The one who’ll be viewing determines the acceptable height, and the other two will be doing the heavy lifting.
Make sure you don’t position the TV too high, primarily if you use a low-profile mount. It might end in you having a sore neck or an unclear picture. It would be great if you simply mount the TV at eye level when seated. This way, the attention level is centered at the highest 2/3 portion of the TV.
All in all, once you’ve got the peak determined, mark the TV location. The marking should then be reinforced with tape on the highest and bottom edge. You then can use a level to ensure the TV is not tilted once mounted.
Step 2: Fine-tune the location
The next thing you’ll want is to get a TV Wall Mount. Mount wall plates on the TV brackets. Once you’ve done this, measure the space from the right edge of the TV to the bracket and repeat it for the left edge as well. And then transfer the measurements to the wall on both sides of the markings.
Step 3: Mounting the TV on the wall
Using the instructions available in the manual, screw the brackets on the TV. Hang the plate on the shelves so that the mount is attached to the TV
Step 4: You’ll then need to prop the TV against the wall.
Next, note the distance between the bottom of the TV to the centre of every row of the mounting holes at the backplate. Similarly, measure the space on the wall from the tape then mark at the stud locations. Again, make sure the marks are perfectly horizontal.
Lastly, drill holes on the marks made. These holes should be smaller than the lag screws. If no lag screws were included, get the recommended size online.
Once you’ve drilled the holes, you’ll then screw the plate on the wall with a ratchet wrench and a socket.
There are many types and models of wall mounts, but there are just three basic styles even with all the variations. But with these three different styles, you can get various adjustment options for your TV. It all comes right down to whether you can get the desired level of viewing comfort.
Most flat-screen TVs are often mounted on the wall, but this must be verified. To try this, search for the Video Electronics Standard Association on the user manual or the TV. You ought to then go ahead and look for a TV mount with a similar VESA number by watching the VESA number.
Below are few profile mounts:
1. Low Profile Mounts
These are referred to as the basic mount designs. These are designed to possess the TV as on the brink of the wall as possible. These are the best as they reduce the chances of the TV being bruised or damaged.
2. Tilting Mounts
These are both adjustable and secure. With these, you can have the TV above eye level and alter the angle to what suits you best.
3.Full Motion Mounts
We highly recommend full-motion tv mounts. With a full-motion mount, the TV can often be tilted, swiveled, panned, or extended. Making 3D adjustments is a lot easier with these mounts.
From the above article, you ought to be ready to do everything to finish up with a well-secured TV without creating a mess or taking an excessive amount of time and helps avoid unnecessary expenses if done by an expert.