The size of a Jumbo universal remote control sets it apart from other universal remote controls. The Jumbo remote is short and broad, unlike conventional long and narrow remotes. With a Jumbo universal remote control, you can program your TV, Cable Box, DVD player, Satellite, and other electronic gadgets in your home.
To achieve this, you’ll need the Jumbo universal remote codes and the knowledge of how to program them.
You’ll learn how to program a Jumbo universal remote in this article.
How to program a Jumbo Universal Remote control Manually Using Codes
1. Make sure you turn on the device you want to program to your remote control.
2. Point the head of your Jumbo universal remote at your TV, DVD player, or other device you want to program.
3. On your Jumbo universal remote, you’ll see the CABL, TV, VCR, DVD, and SAT buttons. Select the appropriate button for your electronic gadget. For example, if you want to program a DVD player, select the DVD option.
4. Hold the “Code Search” button down until the tiny LED illuminates.
5. Enter the Jumbo universal remote code provided in the previous article. The tiny LED light will blink once for each number you enter. The tiny LED light will turn off after you type the correct code. If the light stays on, it means you entered the wrong code. Try again with a different code.
6. Press the “Power” button on the Jumbo remote. If your TV or other electronic gadget shuts off, you have the correct code.
How to program a Jumbo Universal Remote control using Automatic Code Search
You can use this method to program your remote if you don’t want to go through the hassle of looking for the necessary code. Although, we recommend you utilize the coding method because it saves time.
1. Make sure you turn on the device you want to program to your remote control.
2. Point the head of your Jumbo universal remote at your TV, DVD player, or other device you want to program.
3. Hold the “Code Search” button down until the tiny LED illuminates.
4. On your Jumbo remote, you’ll see the CABL, TV, VCR, DVD, and SAT buttons. Select the appropriate button for your electronic gadget. For example, if you want to program a DVD player, select the DVD option.
5. Continue to hold down the power button on your device until it turns off. Your remote goes through the codes stored in it when you click the Power button. As a result, getting the correct code may take some time. Your device turning off indicates that the correct code has been found.
6. Finally, locate and press the ‘Enter’ button on your Jumbo universal remote control to save the discovered code. You’ve successfully programmed your remote.
All-In-One Jumbo Universal Remote codes
• 000
• 001
• 002
• 200
• 172
• 005
• 006
How do I program my jumbo universal remote to my TV?
• Turn on the device you wish to program first, such as your TV or DVD player.
• Aim your TV’s remote control at the gadget.
• Press the device’s “Corresponding” button on the remote.
• Hold down the “Code Search” button for 3 seconds or until the LED light illuminates.
How can I program a Jumbo universal remote to a Vizio TV?
Press and hold the TV (or gadget) button for 5 seconds or until the LED blinks twice; the LED will not turn off. Use the Number Buttons to enter the programming code for your TV (or device) from the code list. After entering each digit, the LED flashes once.
