How To Connect Skullcandy Wireless Earbuds

Skullcandy earbuds are well-known, and they’ve been titled the best noise-canceling earbuds in recent years. This piece will show you how to pair Skullcandy wireless earbuds.

Smartphone manufacturers are currently removing the headphone jack, inadvertently encouraging the use of wireless earbuds. Skullcandy has a significant advantage in this regard.

It’s a little tricky to connect the new Skullcandy wireless earbuds to your device. As a result, TvToTalkAbout will guide you through the pairing process in this article. Let’s get started!

How to Connect Skullcandy Earbuds to Bluetooth

1. Set your Skullcandy earbuds to pairing mode

Most Skullcandy headphones and earbuds have the same power on/off and Bluetooth pairing button. Depending on the model, Skullcandy wireless speakers may or may not have separate Power and Bluetooth Pairing buttons.

Press and hold the pairing button for 4-5 seconds (depending on the device) until the LED light begins to flash — this indicates that the earbuds are now in pairing mode.

2. Locate and pair your Skullcandy earbuds on your phone or laptop

For Android users

Turn on Bluetooth in the Settings menu. Click “Pair new device” in Bluetooth. Tap your Skullcandy device when it appears in the list, and you should pair it with your phone.

For iPhone users

Go to the Settings menu and select Bluetooth. Bluetooth should be enabled. To connect, look for your Skullcandy device under “OTHER DEVICES” and tap it.

For Windows 10 users

Click on your Bluetooth button in the toolbar and select “Show Bluetooth devices” to open “Bluetooth & other devices” in the System Settings. If you can’t find the Bluetooth button, look for it under the upward arrow on the taskbar at the bottom of your screen.

Click “Bluetooth” in the “Add a device” window that appears. Look for your Skullcandy device in the list and tap it to connect. Alternatively, use your Windows search box to look for “Bluetooth.”

When the Bluetooth & other devices window appears, make sure Bluetooth is turned on, then select your device from the list by clicking “Add Bluetooth or other devices.”

For Mac OS users

Navigate to the Apple menu on your Mac to connect your headphones to your Mac. Then go to System Preferences -> select Bluetooth. Locate your Skullcandy headset and click “Connect.”

3. Confirm successful pairing

There are a few ways to tell if your Skullcandy device has been successfully paired. Perhaps you’ll hear a beep or the LED will stop blinking.

As previously stated, the LED on the headset will begin blinking when you initiate the Bluetooth connection, and the LED will stop blinking once you’ve completed the pairing process.

Start over if you have completed the pairing steps but have not yet heard the beep or seen the LED stop blinking. If you’re still having trouble, try resetting your headset.

Replacing Skullcandy earbuds is a simple process that is often consistent across every model. However, you should carefully read the user manual to ensure that you follow the correct procedure.

To reset the headset in most cases, turn it off, hold down the Plus and Minus buttons simultaneously, and wait for the double beep sound.

The LED on your JBL device will stop blinking when you have successfully paired your Skullcandy device to your phone or laptop, and you should hear an audio confirmation that your device is paired (either a tone or voice confirmation).

Troubleshooting your Bluetooth connection

If your device is still not pairing after following the steps above, try resetting your Skullcandy earbuds. Press and hold both the volume up and down buttons on your earbuds until you hear two short beeps (about 4 seconds).

Hold the center pairing button and the volume up button together until you hear two short beeps; this will remove any existing Bluetooth connections and allow you to begin the pairing process from scratch.

Skullcandy Sesh Evo True Wireless In-Ear Earbud

Why are my Skullcandy earbuds not pairing?

If you can’t get your Skullcandy earbuds to pair with your device, turn it off. Hold down the power on button for 5 seconds from the off position until you see a blue LED and hear “pairing.” Select Skullcandy from your device’s Bluetooth settings. The product should be able to communicate with your device.

How do you connect Skullcandy earbuds?

To pair your earbuds with your Android device, go to “+ Pair New Device” and select IndyTM Evo. IMPORTANT: Make sure you select all of the “Pair” and “Ok” prompts that appear on your screen.

What can I do if my Skullcandy earbud stops working?

Hold the first earbud’s back button for 10 seconds before putting it in the case. Hold the second earbud’s back button for 10 seconds before putting it in the case. To activate pairing mode, take both earbuds out of the case. Re-enable Bluetooth on your device and pair it with your earbuds.

Why are my Skullcandy earbuds flashing red?

When a pair of Skullcandy earbuds have less than 30-minutes of battery life left, they will begin to blink red. Every 5-seconds, a flashing light will appear – this means that if you don’t get to a charger soon, your earbuds will stop working.

What does purple light in Skullcandy earbuds mean?

The purple light means your Skullcandy is dead.

Can I pair the Skullcandy earbuds to more than one device?

Yes, you can pair your Skullcandy Bluetooth earbuds with your computer and phone simultaneously.

Are Skullcandy wireless earbuds worth it?

Skullcandy wireless earbuds are always a good option, especially since smartphone manufacturers now remove the headphone jack.

Hopefully, using the information in this article, you will be able to pair your Skullcandy earbuds with any device. If you have any questions about “How to connect Skullcandy wireless earbuds?” please drop them in the comments below.