Sony brand is among the top electronics line. Also, their TVs are highly rated and have been on top of the list for almost a decade, competing with Samsung and LG. But, just like other electronics, it develops faults. If your Sony TV doesn’t turn on, there are certain measures you should use to fix it.
Read through to discover a few common fixes you could use to get your Sony TV to turn on.
How to Fix A Sony TV That Won’t Turn On
Most likely, your Sony TV isn’t turning on could be because your remote battery is drained or was not well plugged into the socket.
However, it is important to identify the root cause of the problem to be able to fix the issue properly.
Below is a list of the most common triggers of an unresponsive TV, and their fixes:
1. Power Reset
A power reset is the oldest trick you could use to fix your unresponsive TV. It works perfectly when your TV refuses to turn on.
To perform a power reset here’s what to do
- Unplug your TV device from the power socket and wait for about 2 minutes.
- Then, re-plug your TV back into the same power socket. If the TV still won’t turn on, repeat the process.
- This time around, hold the power button on your Sony TV for about 10 to 15 seconds before re-plugging your TV back into the power socket.
2. Power Supply Socket Replacement
The cause of the TV issue may be the power supply socket (or outlet). A burn in the socket will require replacement.
Try plugging the TV into other power source outlets to check for this issue. If your Sony TV turns on perfectly, you must replace the power supply socket. You’ll need to try another measure if your TV does not turn on.
3. Incorrect Input Setting
Sony TVs have different inputs for HDMI and component devices. The availability of this feature gives the Sony TV its strength. However, it can cause the TV not to turn on due to wrong connections.
Sometimes, your TV might seem switched on, but the screen will appear pitch black. Technically, your TV is turned on and could be working properly, but it looks like it is turned off. To fix the issue, follow the steps below:
- Press the ‘input’ option button on your TV remote
- Switch to the correct TV input to fix the issue. Ensure that you check which input option you wish to connect your TV to. If you do not know which TV input is the right one, carry out a trial by switching and checking each option.
4. Bad Cable Replacement
A broken or damaged component or HDMI cable could most likely be the root cause of your unresponsive TV.
To fix the issue, replace the component cable before switching on your Sony TV again.
5. Dead Remote Batteries
If you’re using a remote, try using the power button on the TV. If the TV turns on, then your remote may be faulty, or the batteries may have died.
If that is the case, you’ll need to replace the batteries or get a new Sony TV remote.
6. Energy Saving Switch
Power consumption is reduced when the Energy Saving Switch on your TV is switched OFF. This means the TV cannot be powered on. If your TV has an ‘Energy Saving’ Switch, ensure it’s turned OFF.
7. TV Servicing
If all the troubleshooting attempts fail, the next best option will be to service the TV.
First, refer to your TV user manual to know if there’s any warranty. It would be best to have the TV serviced at a Sony Repair Center or any other authorized service center.
Having it serviced by unofficial technicians may result in Sony refusing to repair any future defects.
Final Words
It could be frustrating when your TV refuses to turn on, especially when your favorite show is about to begin. If you don’t want to go through the hassle of trying to find the cause of the problem for fixing, you get in touch with a professional Sony technician to help you out
On the other hand, if you don’t mind going through the stress to get your Sony TV to turn on, the steps to fixing the TV, including possible root causes, have been highlighted in this article.
